6ES7132-4BD32-0AA0 | 5 Electronic Modules For ET 200S Siemens

Description

6ES7132-4BD32-0AA0 is a set of 5 electronic modules designed for the SIMATIC ET 200S system, featuring 4 standard digital outputs per module. Each module operates with a rated supply voltage of DC 24V and includes reverse voltage protection for enhanced durability. The no-load input current from load voltage L+ reaches a maximum of 10mA, while each channel draws a maximum of 10mA from the backplane bus at DC 3.3V, with a typical power loss of 1.6W per module.

The digital outputs offer a rated current of 2A for signal “1”, with an allowable range of 7mA to 2.4A, and a maximum residual current of 0.1mA for signal “0”. They are equipped with short-circuit protection and a typical response threshold of 2.8 to 7.2A. Output delay times are optimized: maximum 50 microseconds (typical 45 microseconds) for 0-to-1 switching, and maximum 120 microseconds (typical 90 microseconds) for 1-to-0 switching. Switching frequencies vary by load type: up to 1000Hz for resistive loads, 2Hz for 0.5H inductive loads, and 10Hz for lighting loads, with a maximum total output current of 4A per module.

Each module has a compact form factor with 15mm width, 81mm height, and 52mm depth, weighing approximately 40g. It supports shielded cable runs up to 1000 meters and unshielded runs up to 600 meters, and holds CE certification for compliance with international standards. The modules feature electrical isolation between channels and the backplane bus, with green LED indicators for digital output status monitoring.