Allen-Bradley 80026-518-01 DC Switching Power Supply

Description

The Allen-Bradley 80026-518-01 DC Switching Power Supply is an industrial power solution with technical specifications aligned with comparable Allen-Bradley modules. Key electrical parameters include a rated 24V DC supply voltage with a maximum operating current of 6A, and a fixed rated current of 6A. It features a compact form factor with dimensions of 12.5 mm width, 98.5 mm height, and 80 mm depth, weighing approximately 0.13 lb, and uses push-in terminals compatible with wire gauges ranging from AWG24 to AWG8 (0.14 square meters to 10 square meters).

Based on comparable models, it may support alternative input voltages of 24V DC (±10%) or 120/240V AC, with a typical power consumption of ≤10W. Potential I/O configurations include 16/32 digital input/output points, accepting dry/wet 24V DC input signals and offering relay or transistor outputs with a maximum 2A rating, plus 500V AC isolation between channels or to ground. It may support communication protocols including EtherNet/IP (10/100 Mbps, RJ45 connector), DeviceNet (500 Kbps, 5-pin M12 connector, requiring a 120 ohm terminal resistor), or ControlNet.

Operating environmental specifications include an IP20 protection rating (for cabinet installation), operating temperature range of 0 degrees Celsius to 60 degrees Celsius, storage temperature range of -40 degrees Celsius to 85 degrees Celsius, vibration resistance of 5g @ 10~500Hz (compliant with IEC 60068-2-6), and a pollution degree rating of 2.